|
|
|
|
Yamaha Fazer Page (cont) |
I decided to try a different screen on the fazer as the original screen is quite low. I settled for a Powerbroze Airflow with a dark tint. This screen is not cut away at the top and so is about 1.5 - 2" higher and is "bubble" shaped at the front.
|
|
|
|
|
Original Screen |
Powerbroze Airflow |
Although the screen is not much higher it does seem to make a significant difference to wind blast at higher speeds. I also think it looks better than the original. Fitting was very easy the holes all lined up OK. However the curve was not exactly right but the six holding screws pulled it in no problem. The trim arrives separate (I assume this is so you can chose whether or not to use it.) I prefer to have it so this must be cut and fitted. This was no problem but I did feel it needed securing in some way so a small bead of glue along the top of the screen and it's done.
|
|
